Stainless steel products polishing?

1, rough grinding, this process is mainly to remove the solder joints left by the welding on the workpiece and the bruises in the previous process, to achieve the preliminary forming of the welding corner, the horizontal plane and vertical plane are basically no big scratches, no bruises, usually with 600# sand belt grinding the workpiece on three sides, after this process, the roughness of the workpiece surface should be able to reach R0.8mm. In the polishing process, pay attention to the inclination Angle of the belt sander, but also to control the pressure of the belt sander on the stainless steel workpiece, generally speaking, it is more moderate to form a straight line with the thrown surface!

2, semi-fine grinding, mainly for the unsealing of the process to repair, as well as the grinding marks produced in the previous step for further fine grinding, repeated grinding marks left in the rough grinding, is to achieve no scratches on the surface of the workpiece, surface brightening and other purposes. An 800# belt is usually used to grind three sides of the workpiece in accordance with the previous round trip grinding method. The surface roughness of this process should be able to reach R0.4mm, in this process, do not produce new scratches and bruises, if this happens, it is difficult to repair the subsequent process.

3. Fine grinding, the main purpose of this process is to polish the welding joints of the parts and the unground parts of the workpiece, remove all scratches and scratches on the surface of the workpiece, and make the surface of the workpiece further bright.

Usually the use of 1000# sanding belt is mainly to modify the fine lines of the previous step, and the grinding method is the same as above. The workpiece after grinding through this process should be basically close to the mirror effect, and the surface roughness of the workpiece should be able to reach R0.1mm.

Stainless steel products out of light?

1, the mirror using high-speed motor to drive the wool wheel (available on the market), with the big green wax to imitate the previous polishing method for mirror polishing, the main purpose of this process is to polish the workpiece after polishing the previous several processes, rather than further grinding. Be careful not to rub the polishing wax onto the covering film on the surface of the workpiece during this step, and be careful not to damage the covering film.

2, polishing this process is a process after the mirror polishing Z, with a clean cotton wheel after the mirror surface friction, the workpiece after the completion of all previous processes to wipe, polish. The goal of this process is that the surface of the workpiece cannot be distinguished by welding marks, and the waxed and polished workpiece is polished to a brightness of 8k mirror-like reflection, and the part of the workpiece that has been tossed and the part that has not been tossed can hardly be distinguished. Achieve full mirror effect.

The surface effect?

8K, also known as mirror plate, is polished on the stainless steel plate by polishing equipment through grinding liquid, so that the brightness of the stainless steel surface is as clear as a mirror.

Main uses: Mainly used in building decoration, elevator decoration, industrial decoration, facilities decoration and other stainless steel products.

Hair lines?

There are a variety of hair lines, there are hair lines (HL), snow sand (NO4), and lines (chaos), cross lines, cross lines, etc., all lines need to be processed by oil throwing hair lines machine according to requirements.

Main uses: Mainly used in building decoration, elevator decoration, industrial decoration, facilities decoration and other stainless steel products. Stainless steel champagne gold and grain plate decorative effect is strong.

How many common hair lines?

Oil grinding straight hair /HL: mainly used in building decoration, elevator, building doors, panels, etc.

Oil abrasive hair: used in elevators, building interior and exterior decoration materials, electrical products, kitchen equipment and food equipment.

Dry hair: Used in household appliances, elevators, kitchen equipment, decorative materials, etc.

The use of stainless steel products is more and more frequent, the reason is that the appearance of stainless steel products is beautiful, and now the development of stainless steel screen printing technology, the pattern on the surface of stainless steel is also more and more, further meeting the needs of people, and the stability, corrosion resistance and strength of stainless steel also meet the needs of industry.