Deburring polishing machine is a kind of equipment commonly used in the metal processing industry, its main role is to remove the burrs on the surface of the material, and carry out polishing treatment to improve the quality and appearance of the product. The following will introduce the processing process of deburring polishing machine in detail.

1. Adjust the equipment parameters: First of all, adjust the parameters of the deburring polishing machine according to the characteristics and requirements of the material. Including setting speed, feed speed, polishing time, etc. Different materials may require different parameter Settings, so carefully adjust them before processing.

2. Clean the surface of the material: Before polishing, ensure that the surface of the material is clean. It can be cleaned with special chemical solvents or cleaning agents to remove oil or dirt from the surface. After cleaning, wipe with a clean cloth to ensure that the surface is completely dry.

3. Use polishing materials: Polishing materials are the key to burr polishing. Commonly used polishing materials are sandpaper, abrasive, grinding wheel and so on. Choosing the right polishing material can effectively reduce burrs and improve the surface finish.

4. Rough throwing: Place the material on the work table of the deburring polishing machine and start the equipment. The abrasive particle or grinding wheel is moved to the surface of the material, and the cutting and grinding are carried out according to a certain pressure and speed to remove large burrs. At this time, ensure smooth operation and avoid excessive grinding resulting in material damage.

5. Fine polishing: After rough polishing, fine polishing is needed to further remove residual burrs and improve surface quality. At this time, you can replace the fine abrasive or grinding wheel and adjust the parameters of the polishing machine. When performing fine polishing, lighter pressure and smaller rotational speed can be used to avoid excessive grinding.

6. Check the surface quality: After polishing, the surface of the material should be checked to ensure that all burrs are removed and the surface is smooth and smooth. If necessary, take a closer look with a magnifying glass or microscope and touch the surface with your hand to check for any remaining burrs or bumps.

7. Cleaning equipment and materials: After the polishing process is finished, the equipment and materials should be cleaned in time. Cleaning equipment can be done with a brush, hair dryer or rag to ensure that the equipment is clean. Remove the material from the workbench and clean and pack it to prevent re-contamination or damage.

In short, the key to the processing process of the deburring polisher is to adjust the equipment parameters, clean the surface of the material, use the appropriate polishing material, perform rough and fine polishing, check the surface quality, and finally clean the equipment and materials. Through the correct use of deburring polishing machine, you can effectively remove burrs and make the surface quality of the product meet the requirements. In actual operation, it is necessary to adjust parameters and optimize the process according to the specific materials and requirements to obtain the polishing effect.